Grate And Log Placement - Vermont Castings A18CFLRN/P Installation And Operation Instructions Manual

1) Place the Elevated Grate Steps onto the back
of the Grate and attach the Fettel to front of Grate
as shown in Figure 8.
2) Place the Grate over the Burner Pan so the
front legs of the Grate are 1" behind the front edge
of the Pan, as shown in Figure 9.
3) Place the larger bottom logs (longer log in back,
shorter (2) in front) onto the grate, leaving as much
space between them as possible. (Fig. 9) When
burning, the flames should come up directly between
these two logs.
4) Next, place the smaller top logs diagonally onto the
bottom logs. The top logs can be arranged to achieve
your desired flame pattern. Refer to Figures 10, 11
and 12 (R18CFL, R24CFL, and R30CRL). Be sure you
leave as much open space between the logs as possible
to minimize flame impingement and sooting.
5) Open the bag of Lava Rock and spread the rocks
onto the fireplace floor around the burner pan for
decorative purposes. (Fig. 7)
Figure 10
A18CFLR Log Set
Figure 11
A24CFLR Log Set
8

Grate and Log Placement

R18CFLR, R24CFLR and R30CFLR Log Sets
Grate Clip
Fettel Cast
Front Grate
Front (2)
Shorter Logs
1"
Figure 12
A30CFLR Log Set
Grate
Steps
Grate
Figure 8
Long Log
Figure 9
CFM130
R-CFL Gas Log Sets
2/14/01
20003903