Bosch 2600 Series Instruction Manual page 24

LTC 2600 Series | Instruction Manual | Multiplexer Set (MS) Commands
MS-VCR-MODEL <vcr> <vcr-model#>
This command defines the VCR attached to the <vcr>
parameter to be the type corresponding to the <vcr-
model#> parameter.
Parameter values are as follows:
<vcr> 1
2
<vcr-model#> Defined as <standard-vcr-model#>
OR <custom-vcr-model#> where:
<standard-vcr-model#> is:
7 PHILIPS_KV_7024
8 PHILIPS_TC3990A_SP_T120
9 PHILIPS_TC3990A_SLP_T120
10 PHILIPS_TC3991
11 MITSUBISHI_HS5440U
12 SANYO_SRT500
13 JVC_SR_L901U
14 PANASONIC_AG_RT600
15 SP_T120_FIELD
16 SP_T160_FIELD
17 SLP_T120_FIELD
18 SLP_T160_FIELD
19 SP_T120_FRAME
20 SP_T160_FRAME
21 SLP_T120_FRAME
22 SLP_T160_FRAME
<custom-vcr-model#> is:
1 to 6 (corresponding to custom VCR setting
1 to 6)
Bosch Security Systems | July 12, 2004
VCR output
VCR/Monitor B output
MS-VCR-PLAYBACK-ALGORITHM <algorithm>
This command sets the teletext algorithm for playback
for all VCRs. If the unit is already in playback mode,
the <algorithm> will not be effective until playback is
switched off.
Parameter values for <algorithm> are as follows:
1 LTC 2600 Burle 40-byte format
2 TC8989B
3 DMSX8
4 LTC 8256 Robot format
NOTE: Please see the User Interface for the latest list
of supported formats.
MS-VCR-RECORD-ALGORITHM <algorithm>
This command sets the teletext algorithm for record for
all VCRs.
Parameter values for <algorithm> are as follows:
1 LTC 2600 Burle 40-byte format
2 TC8989B
3 DMSX8
4 LTC 8256 Robot format
NOTE: Please see the User Interface for the latest list
of supported formats.
MS-VCR-RECORD-LIST <vcr> <camera list>
This command sets the record list for the VCR
attached to the specified monitor.
Parameter values for <vcr > and <camera list> are as
follows:
<vcr> 1 VCR output
2 VCR/Monitor B output
<camera list> A list of camera numbers (1-16), up to
32 in the list, given in the order
desired for the record list
EN | 24
Burle 46-byte format
Dedicated Micros format
Burle 46-byte format
Dedicated Micros format