Table of Contents
Advertisement
MAINTENANCE
FAN REPLACEMENT
1)
Disconnect power to fan.
2)
Remove 7 screw under the bottom shield to remove the
bottom access panel. See diagram 1.
Diagram 1
3)
Disconnect the molex plug (from inside the stove).
Note: The #8 ground lug is a dedicated ground for mobile
home use only.
Wiring Diagram
18
Diagram 2
4)
Loosen the four 8-32 x 1/2 screws provided into the nutserts as
shown in diagram 3. NOTE: Make sure the fan is supported
as it may fall when the 4 screws are loosened.
5)
Disconnect the 2 ground wires (green and yellow/green
striped) to the ground lug as per diagram 2.
Note: Ground lug is located on the bottom of the fan
assembly. See diagram 3.
Diagram 3: Ground Lug
Masport F33-1 Freestanding Gas Stove
Hide quick links:
Advertisement
Table of Contents
