Broiler Pan And Grid; Oven Light Replacement - GE JKP44 Use And Care Manual

and satisfactory service. Follow these directions carefully in caring for your
oven to assure safe and proper maintenance.
BE SURE ELECTRICAL POWER IS OFF BEFORE CLEANING
ANY PART OF THE OVEN.

Broiler Pan and Grid

After broiling, remove the broiler pan from the oven.
Remove the grid from the pan. Carefully pour out
the grease from the pan into a proper container. Wash.
with a soap-filled or plastic scouring pad. Rinse the
broiler pan and grid in hot water.
If food has burned on, sprinkle the grid with
detergent while hot and cover with wet paper towels
or a dish cloth. Soaking the pan will remove burned-
on foods.
Both the broiler pan and grid may be cleaned with a
commercial oven cleaner.

Oven Light Replacement

main fuse or circuit breaker panel. Be sure to
let the light cover and bulb cool completely before
removing or replacing them. When in use, light bulbs
can become warm enough to break if touched with a
moist cloth or towel. When cleaning, avoid touching
warm lights with cle::..ing cloths if the light cover
removed.
is
The oven light (bulb) is covered with a removable
glass cover which is held in place with a wire.
Remove the oven door. if desired. to reach the
cover easily.
To remove:
Hold hand under the cover so it doesn't fall
when released. With fingers of the same hand, firmly
push back the wire cover holder. Lift off the cover.
Oven Heating Elements
bake element or the broil element. ~J¬•üJ¬••K¬••K¬•
not clean the
Any soil will burn off when the elements are heated.
The bake element can be lifted gently to clean the
oven floor. If spillovers. residue or ash accumulate
around the bake element gently wipe zlround the
cleaning oven.
Both the broiler pan and grid can also be cleaned in
[he dishwasher.
in the oven.
. .
DO NOT REMOVE ANY SCREWS.
Replace bulb with 40-watt home appliance bulb.
To replace the cover:
Place it into the groove of the light receptacle.
Pull the wire forward to the center of cover until it
snaps, in place. When in place, the wire holds the
cover firmly. Be certain the wire is in the depression
in the center of the cover.
Connect electrical power to the oven.
.
Wire cover holder
1 '