GE JKP44 Use And Care Manual page 24

Quick Reminder:
2. Press the INCREASE or DECREASE pad
until the desired Clean Time appears.
additional time for cooling before you try to set
the cycle.
NOTE: Only one oven at a time can be self-cleaned.
1. F I1 directions in the Before a Clean
O OW
Cycle section.
2. After closing the door, press the AUTO
AUTO SELF SELF CLEAN pad.
CLEAN
3. Press the INCREASE or DECREASE
Clean Time is normally 3 hours. You
can change the Clean Time to any time
between 2 and 4 hours, depending on
the amount of soil in your oven.
1. Press the CLEAWOFF pad.
CLEAR
OFF
(continued)
The self-clean cycle will automatically begin after
"Clean" is displayed and the time for the Clean
cycle is set. The words "ON" and "LOCK" will
appear in the display when the door automatically
locks. It will not be possible to open the oven door
until the temperature drops below the lock
temperature and the LOCK light goes off.
4. When the LOCK light is off, open the door.
NOTE:
will be finished by pressing the STOP
STOP
TIME
TIME pad.
The word "clean" will be displayed, the word
"DOOR" will flash and oven control will sign~il
if you set the clean cycle and forget to close the
oven door.
A fan may automatically turn on and off to cool
internal parts. This is normal and the fan may
continue to run even after the oven is turned off.
2. When the LOCK light goes off and the oven
has cooled below the locking temperature. open
the door.
—