Broiler Pan And Grid; Control Panel; Heating Elements; Painted Surfaces - GE JCKS06 Owner's Manual

Care and cleaning of the oven.
After broiling, remove the broiler
pan from the oven.
Do not store a soiled broiler pan
and grid anywhere in the oven.
Do not allow food spills with a
high sugar or acid content (such as
tomatoes, sauerkraut, fruit juices
or pie filling) to remain on the
surface. They may cause a dull
spot even after cleaning.
14
Broiler Pan & Grid
After broiling, remove the broiler pan
from the oven. Remove the grid from the
pan. Carefully pour out the grease from
the pan into a proper container.
Wash and rinse the broiler pan and grid
in hot water with a soap-filled or plastic
scouring pad.

Painted Surfaces

Clean with soap and water or a vinegar and
water solution.

Control Panel

It's a good idea to wipe the control panel
after each use. Clean with mild soap and
water or vinegar and water, rinse with
clean water and polish dry with a soft
cloth.
Oven Heating Elements
Do not clean the bake element or the broil
element. Any soil will burn off when the elements
are heated.

Porcelain Oven Interior

With proper care, the porcelain enamel
finish on the inside of the oven—top,
bottom, sides, back and inside of the
door—will stay new-looking for years.
Let the oven cool before cleaning. We
recommend that you wear rubber gloves
when cleaning the oven.
Soap and water will normally do the
job. Heavy spattering or spillovers may
require cleaning with a mild abrasive
cleaner. Soap-filled steel wool pads
may also be used.
Household ammonia may make the
cleaning job easier. Place 1/2 cup in a
shallow glass or pottery container in a
cold oven overnight. The ammonia
fumes will help loosen the burned-on
grease and food.
If food has burned on, sprinkle the grid
with detergent while hot and cover with
wet paper towels or a dishcloth. Soaking
the pan will remove burned-on foods.
Both the broiler pan and grid may be
cleaned with a commercial oven cleaner.
Both the broiler pan and grid can also be
cleaned in a dishwasher.
Do not use commercial oven cleaners, cleansing
powders, steel wool or harsh abrasives on any
painted surface.
Do not use abrasive cleansers, strong
liquid cleansers, plastic scouring pads or
oven cleaners on the control panel—they
will damage the finish. A 50/50 solution
of vinegar and hot water works well.
To clean the oven floor, gently lift the
bake element. Clean with warm soapy
water.
If necessary, you may use an oven cleaner.
Follow the package directions.
■
Do not spray oven cleaner on the electrical
controls and switches because it could cause a
short circuit and result in sparking or fire.
■
Do not allow a film from the cleaner to build up
on the temperature sensor—it could cause the
oven to heat improperly. (The sensor is located
at the top of the oven.) Carefully wipe the
sensor clean after each oven cleaning, being
careful not to move the sensor as a change in
its position could affect how the oven bakes.
■
Do not spray any oven cleaner on the oven
door, handles or any exterior surface of the
oven, cabinets or painted surfaces. The cleaner
can damage these surfaces.