Using Your Oven; Shelf Positions; Oven Lights - GE JKP44 Use And Care Manual

ore Using Your Oven
1. Look at the controls. Be sure
2. Check the oven interior. Look at the shelves.
Take a practice run at removing and
3.
4. Keep this guide handy so you can refer to it.
especially during the firs{ weeks of using your
new oven.
Oven Shelves
when placed correctly on the shelf supports, they
will stop before coming completely out from the
oven, and will not tilt when you are removing food
from them or placing food on them.
When placing the cookware on a shelf, pLIll the
shelf out to the bump on the shelf support. Place
the cookware on the shelf, then slide the shelf back
into the oven. This will eliminate reaching into the

Shelf Positions

The o~,en has 4 shelf supports identified in this
illustration as A (bottom), B, C and D (top).
Shelf positions for cooking are suggested in the
Baking. Rousting and Broiling sections.

Oven Lights

Both of the Iighls come on automatically when either oven
Use the pad on the control panel to turn the lights on ~nd oft
when the doors are closed.

USING YOUR OVEN

understand
replacing
You may notice a "burning" or "oily.> smell the
first few times turn your oven on. This is
normal in a new oven and will disappear in a short
time. To speed the process, set a self-clean cycle for
Cleaning Oven section.
internal parts. This is normal and the fan may
continue to run even after the oven is turned off.
To remove a shelf from
the oven, pull the shelf
toward you, tilt the front
end upward and pull the
To replace, place the
oven. Tilt up the front and push the shelf toward the
back of the oven until it goes past the bump on the
shelf support. Then lower the front of the shelf and
push it all the way back.
i
9