Seeley BreezeAir ILL239-D Owner's Manual page 9

WATER MANAGER
®
The Breezair remote control is
fitted with the WaterManager
feature which automatically
monitors the quality of the water
in the cooler.
The WaterManager drains the
existing water in the cooler to
allow it to be replaced with fresh
water, only when it is needed.
Therefore, you may notice your
cooler draining water
occasionally. How often the
®
WaterManager performs this
operation depends upon the
quality of the water supply and
the rate of evaporation.
In areas of poor water quality, the
®
WaterManager will operate more
often as it tries to maintain the
optimum water quality in the
cooler. This maximises the
cooling effect and life of the
cooling pads.
The remote control has a unique
feature attached to the
®
WaterManager that allows you to
specify either high or low salinity
settings. The low salinity setting
is used in specific circumstances
only. We recommend talking with
your dealer before adjusting this
setting.
MANUAL
FAN
SPEED
®
The high salinity setting is designed to
®
operate the cooler at a maximum safe
salinity level to maintain a normal
working life. It also results in a
minimum usage of water .
®
NOTE: High salinity outlet water should
not be used on salt sensitive grass or
plants. It has a high salt content.
The current WaterManager setting is
displayed by holding down the
button and pressing the
setting can be changed by holding
down the
either the
and LO respectively.
The factory default WaterManager
setting is HI. For areas operating with
bore water, DIP switch F should be
switched to off (see page 10). This will
disable the salinity measuring circuit
and simply drain water from the tank
every 65 minutes of operation.
COOL
ECONOMY
ILL1111-A
SEELEY INTERNATIONAL – OWNER'S MANUAL
MANUAL
COOL
PM
FAN
SPEED
ECONOMY
ILL1110-A
button and pressing
or
®
.......
button. The
button for HI
®
9