Economy Mode; Drain Mode - Seeley BreezeAir ILL239-D Owner's Manual

ECONOMY MODE

Selecting the ECONOMY mode limits
the maximum available cooling or
ventilation and reduces the power
used by up to 20%. The ECONOMY
function can be used in either AUTO
or MANUAL modes. To select this
mode press the
ECONOMY appears on the display.
MANUAL
FAN
SPEED

DRAIN MODE

Pressing the
drain valve in the cooler and empties
the water in the tank. This will leave
the tank clean and dry and turn the
cooler off.
DRAIN TANK
If the cooler has not been used for 3
days or 3 hours, depending on the
DIP switch setting - see page 10, the
tank will automatically be drained to
ensure the system remains clean.
®
8
button so that
COOL
PM
ECONOMY
ILL1125-A
button opens the
ILL1107-A
Evaporative Cooler
PRE - COOL MODE
Your remote control is designed to
allow for the saturation of the
cooler's cooling pads before the
fan is switched on. This function,
referred to as PRE-COOL mode,
is enabled at DIP switch D (refer
to page 10). Once it is enabled the
cooler, when first switched on,
operate as follows:
(1)...... If the tank is empty the
drain system will be closed. The
tank will then be filled.
(2)...... After 60 seconds of the
tank filling with water, the pump
will turn on and saturate the filter
pads.
(3)...... After the pump has been
running for 3 minutes the fan will
start.
During this operation the word
PRE-COOL will be displayed on
the remote control's screen.
MANUAL
FAN
SPEED
PRE-COOL
NOTE: PRE-COOL mode will not
be activated if VENT is selected
on the remote control or the cooler
is used again shortly after having
been turned off.
will
COOL
PM
ECONOMY
ILL1142-A