Seeley BreezeAir ILL239-D Owner's Manual page 14

CHANGING THE DEFAULT
PARAMETER SETTINGS
The following operating parameters
can be adjusted using the wall control
but only if a drain valve has been
fitted to your cooler.
SALINITY CONTROL METHOD
SELECTOR
This parameter controls the following
2 options. Value 0 uses the intelligent
®
WaterManager which measures and
controls the water's salinity level.
Value 1 drains the tank every 65
minutes when the cooler is ON. Value
0 is the preset and preferred setting.
To change the salinity control setting
use the following sequence:
(1)......With the wall control turned
OFF, hold down the
button. Continue to hold this
button down and press the
button. The current
setting and the 3 right most
fan speed bars will be
displayed.
(2)......Press the
button to scroll through the
various setting options
discussed previously.
(3)......When the desired setting is
displayed, press the
button to store the new setting.
®
14
or
Evaporative Cooler
TANK DRAIN DELAY
This parameter changes the time
before the tank is emptied of
water, after the cooler has been
turned off. The 5 options available
are:
0 = 4 hours
1 = 1 day
2 = 2 days
3 = 3 days (default)
4 = 4 days.
To change the tank drain delay
use the following sequence:
(1)......With the wall control turned
OFF, hold down the
button. While holding down
this button press the
button. The current setting
and 3 central fan speed
bars will be displayed.
(2)......Press the
button to scroll through the
available settings.
(3)......When the desired setting is
displayed, press the
button to store the new
setting.
or