To Select The Dvor Mode - Yaesu FTA-310 Operating Manual

To Select the DVOR Mode

 When entering the NAV band (108.000 - 117.975
MHz), the FTA-310 selects the DVOR mode auto-
matically. The "C
ourse
at the upper left corner on the display, and the "
or " " indicator will appear below the "Course
Indicator" field on the display.
Note: The "C I
ourse ndICator
when either your aircraft is too far away from the VOR
station or the frequency is not correctly set to that of
the VOR station. Conversely, the "Course Indicator"
will indicate " " when receiving a localizer chan-
nel. The FTA-310 cannot decode a localizer signal.
 The " " or " " flag indicators tell you wheth-
er the VOR navigation information is based on a
course leading to the VOR station or leading away
from the VOR station.
 To change the flag from "
versa, press the [ F ] key momentarily, then press the
[ 3 ( FROM )] or [ 2 ( TO )] key, respectively.
 The small "C I
ourse ndICator
flag indicators may be toggled to the larger "Fre-
quency" portion of the display. To do this, press and
hold in the [ ( )] key for 2 seconds to toggle
to the larger display area. Press the [
momentarily again to return to the smaller displays.
FTA-310 O
perATing
vor n
I " field will appear
ndICator
"
" indicates " "
" to " " or vice
" and " / "
( )] key
M
AnuAl
avIgatIon
37