Extended Recption, Wfm Sql, Auto-Mode Select - Yaesu FT-50 Instruction Manual

Extended Reception
Introduction
offers extended receiver tuning and scanning. This
feature may not be available in all countries and all
transceiver versions - please check with your dealer.
While operating from VFO A or B, each momentary
press of the knob recalls four preset band-ranges for
tuning and scanning:
Note - If your radio only switches between 2-m and
70-cm bands, you can expand receiver coverage by
LAMP
hold the knob and
turning the transceiver on.
button depressed while
WFM Squelch Setting
The default squelch threshold for WFM (wide band-
width FM) is preset to 0 (recommended for broadcast
reception). To change this setting:
knob down for % second, then turn it to select
ting, then rotate the knob to select the desired level.
Press the PTT to save the setting and exit.
Auto-Mode Select
By default, the correct demodulation mode (FM,
WFM or AM) is automatically selected according to
frequency ranges, as shown below:
TV (Ch 5-61, FM Broadcast-
Aviation Nav/Com
LMR amateur marine, Wx
TV
UHF/TV (Ch
UHF TV (Ch 34-68)
trunked, SMR
M o d e
AM
F M
CH 7-10
AM
Gov. (Military)
FM
LMR N F M
14-24)
WFM
WFM
"
FM