Auto Network Setup - Samsung SND-3080 User Manual

Hide thumbs Also See for SND-3080:

Table of Contents

network connection and setup

If the Ip router has more than one camera connected

Configure the IP related settings and the Port related settings distinctly with each other.

IP related settings

Port related settings

If the <HTTP Port> is set other than 80, you must provide the <PORT> number in the address

bar of the Internet browser before you can access the camera.

ex) http://IP address : HTTP Port

http://192.168.1.201:10000

Auto Network Setup

Run <Ip Installer.exe> to display the camera search list.

At the initial startup, both [Auto Set] and [manual Set] will be grayed out.

For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not

support this function.

Select a camera in the search list.

Find the MAC (Ethernet) address labeled

on the rear of the camera.

Both the [Auto Set] and [manual Set]

buttons will be activated.

Click [Auto Set].

The AUTO SET dialog appears.

The <Ip Address>, <Subnet mask>,

and <Gateway> will be set automatically.

_ network connection and setup

Snd-3080p