Table of Contents
Advertisement
Item
Inner Cover
Cover used to protect the main unit.
Wing-Side Hook
Tap on either end to remove the inner cover.
The Test Monitor Cable is connected to a portable displayer and used for
Monitor Out
testing the camera.
Zoom Lever
Used to adjust or fix the zoom factor of the lens.
Focus Lever
Turn it to the left or right to adjust the focus; turn it clockwise to fix the focus.
Tilt Screw
Used to adjust or fix the tilt of the lens.
Bracket
Used to install the camera on the wall or ceiling with the screws.
If you drill a hole in the wiring cover for wiring,
remove the cover and attach the provided dust-
proof plate to it, and arrange the cables through the
Wiring Cover
plate.
The dust-proof plate is to prevent outside dust from
inflow to the wiring compartment.
If you want to remove the bracket from the main unit or remove the camera
Release Lock
from the bracket, push this out and turn the main unit in the <UNLOCK>
direction.
Description
English _1
Advertisement
Table of Contents
