Table of Contents
Advertisement
Inside
Item
Alarm I/O Port
Reset Button
Consists of two different ports:
- ALARM IN : Used to receive the alarm input signal.
- ALARM OUT : Used to output the alarm output signal.
- GND : Used for earth-grounding.
Restores all camera settings to the factory default. Press and hold it for
about 3 seconds to turn off the system indicator and restart the system.
After resetting the camera, you must run the IP Installer program to
J
change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
Description
English _11
Advertisement
Table of Contents
