White Bal - Samsung SND-3080 User Manual

camera setup
dAy/NIGhT
You can specify a recording mode according to the scene.
For selecting and saving each menu item, refer to "how to use the keyboard controller". (page 20)
Select <CAmeRA SeT> - <dAy/NIGhT>.
1.
2. Select a screen transition mode according to the
illumination, and set options as appropriate.
DAY : Fixed to DAY mode, regardless of the

scene.
NIGHT : Fixed to NIGHT mode, regardless

of the scene.
If BURST is set to <oN>, the burst signal will
output.
AUTO : According to the luminance, this will

switch DAY to NIGHT mode, or vice versa.
DAYNIGHT / NIGHTDAY : If set to

<AUTo>, you can specify the brightness
level triggering the mode switch between
DAY and NIGHT as well as the interval.
MASK AREA : If there exists a bright spot

light source in a night scene, you can specify
the size and position as needed.
Any excessively bright area in a night scene
will be masked.

WhITe BAL

If you need to adjust the screen brightness, use the WHITE BALANCE function.
For selecting and saving each menu item, refer to "how to use the keyboard controller". (page 20)
1. Select <CAmeRA SeT> - <WhITe BAL>.
Select a mode where you set the balance.
2.
DAY : You can set the RED, and BLUE value

in DAY mode.
NIGHT : You can adjust the <WhITe BAL>

according to the ambient luminance.
_ camera setup
AUTO
BURST
DAYNIGHT
BRIGHTNESS
DWELL TIME
NIGHTDAY
BRIGHTNESS
DWELL TIME
MASK AREA
MASK AREA
<SIZE>
<LOCATION>
WHITE BAL
DAY/NIGHT
MODE
[ 00 ] ---- I ----
RED
[ 00 ] ---- I ----
BLUE
OFF
MID
2S
MID
5S
1 2
DAY
ATW2