Table of Contents
Advertisement
INSTALLATIoN
precautions before installation
Ensure you read the following instructions before installing the camera:
Select an installation site (ceiling or wall) that can endure at least 5 times of the camera
weight.
Stuck-in or peeled-off cables can cause damage to the product or a fire.
For safety purposes, keep anyone else away from the installation site. And put aside
personal belongings from the site, just in case.
Installing the camera
1.
Hold down the bottom lock lever while
removing the cover with the other hand.
Removing the cover reveals the main unit
and inner cover.
To fix the camera position, hold down either
2.
hook of the inner cover and lift it up.
3.
Push the release lock out while turning the
main unit in the <UNLoCK> direction to remove
the bracket.
If this doesn't work, use the hole on the bottom
of the bracket to turn the bracket in the <LoCK>
direction.
English _1
Advertisement
Table of Contents
