Table of Contents
Advertisement
-
Multicast port : UDP Port used to transfer video signal with the UDP Multicast
protocols. The default is 60005(UDP).
-
TTL* : Set the TTL for the VNP packet.
The default is 63, and if you want to change the address, specify it ranging from
0 to 255.
RTP configuration : You can set the RTP protocol.
-
RTSP port : You can set the RTSP port.
-
Streaming port : Used to transfer video signal with the RTP protocols.
The default range is between 61000 and 61999.
-
Multicast address : IP address used to transfer video signal with the RTP
protocols.
-
Multicast port : Used to transfer video signal with the RTP-protocol multicasting.
-
TTL* : You can set the TTL for the RTP packet.
2.
When done, click [Apply].
Your settings are saved and the system restarts.
The currently opened web browser will be closed.
If the IP router has more than one camera connected, you should configure IP and port settings
M
differently for each camera.
To set the user account
1.
Click <Basic> - <User>.
The User setup window appears.
Login authentication : You can set to
authenticate the login by the user.
-
If you select <enable>, the user
should have gone through the
login authentication; if selecting
<disable>, every user can access
the system without the login authentication, having the ordinary user permissions.
-
When done, click [Apply].
User login ID/password list : Displays a list of accessible users ID, passwords, and
ratings.
-
You can add up to 10 users.
-
The admin ID is "admin".
-
The password for the admin ID can be changed, but not added or deleted.
2.
When done, click [Apply].
Your settings will be saved.
The currently opened web browser will be closed.
English _
Advertisement
Table of Contents
