Toshiba e-Studio 232 Operator's Manual page 54

4.Setting Copy Paper (Cont.)
8
Push the drawer straight into the equipment until it comes to a stop.
1
• Be sure to close the drawer securely and carefully.
Be careful not to let your fingers be caught when closing the drawer. This could injure you.
9
When the paper size is different from the
one in the drawer, change the paper size
indicator to match with the size of paper
which has been set.
10
When the paper size is different from the one in the drawer, press the
[YES] button. When the paper is the same size as the one in the
drawer, press the [NO] button. (When you press the [NO] button, you
do not need to continue with step 11 and subsequent steps.)
This menu may not be displayed under a certain equipment setup. In this case, see the procedure in
"Changing the setting of paper size" to change the paper size setting when a paper size different from the one
which had been placed in the drawer is set.
- Contact the administrator in your office when the display setting of this menu needs to be changed.
52
1.BEFORE USING EQUIPMENT
P.54