Toshiba e-Studio 232 Operator's Manual page 212

2.Registering User Groups and Templates (Cont.)
7
Press the blank key, and then press the [SAVE] button.
8
Press the [NAME1] button and the [NAME2] button, and then enter the
template name.
7
• [NAME 1] is displayed on the upper side and [NAME 2] is displayed on the lower side of the template button.
Enter [NAME 1] and/or [NAME 2]. When both are entered, [NAME 1] is displayed on the upper side and
[NAME 2] on the lower side of the button.
• When the [NAME 1] or [NAME 2] button is pressed, the letter entry menu (
acters can be entered.
• The following symbols cannot be used for [NAME 1] and [NAME 2].
["], [=], [|], [*], [<], [>], [?], [+], [[], []], [;], [:], [/], [\], [,], [.]
9
Press the [USER NAME] button, and then enter the user name of the
template as required.
• When the [USER NAME] button is pressed, the letter entry menu (
can be entered.
• To set the password, proceed to step 10. If not, skip to step 12.
210
7.TEMPLATE
P.35) is displayed. Up to 11 char-
P.35) is displayed. Up to 30 characters