Toshiba e-Studio 232 Operator's Manual page 265

4
Press the paper size button corresponding to the one you have
placed.
5
Press the [START] button.
• Printing is performed. Press the [JOB STATUS] button when printing is completed.
Printing by selecting a paper size already placed in another drawer
When the specified size of paper is not in the drawer, you can release the error by selecting another size of
paper already placed in another drawer, instead of placing the specified size of paper in the drawer. How-
ever, a part of the image may not be printed if the size of the paper placed in the drawer is smaller than the
specified one.
Press the drawer button whose size you want to use on the touch panel. Then press the [START] button.
8
263