Features - Toshiba e-Studio 232 Operator's Manual

Features

The e-STUDIO232/282 or e-STUDIO233/283 is a Multifunctional Digital Systems that is capable of using
each function via networks. The e-STUDIO232/282 or e-STUDIO233/283 also has various optional paper
handling devices to meet the needs of your office.
The e-STUDIO232/282 or e-STUDIO233/283 offers the following convenient features, functions and
options.
• The copying speed is 23 copies (A4) per minute for e-STUDIO232/233, 28 copies (A4) per minute for
the e-STUDIO282/283.
• Considering eco-friendliness and energy saving, the toner recycling system in which used toner is
recovered and reused is adopted, warm-up time is shortened to approximately 25 seconds
ozone generation amount in the equipment is reduced.
• Improving the scanning speed allows you to scan, fax and copy with ease. You can also make duplex
copies at the equivalent speed.
• An all-in-one controller is installed to perform the effective network functions. (To use the print, scan
and Internet Fax functions, optional printer kit, scanner kit, printer/scanner kit, etc. are required.)
• The input/output interface is designed for internet connection (access) environment.
• A 1/2 VGA wide panel improves operability and efficiency.
• A universal design is adopted for the control panel whose angle can be changed.
• The e-Filing function allows you to scan, save, reuse, and re-edit the original data via client PCs from
the scanning section.
• Received Fax documents can be stored in the e-Filing without printing them. (Optional FAX board is
required.)
• Scanned originals can be sent via Fax and E-mail simultaneously. (To send them via Fax, optional FAX
board is required. To send them via E-mail, optional printer/scanner kit or scanner kit is required.)
• Electronic sorting improves copying productivity.
• Comes with rich editing functions such as trimming, masking and mirror.
• Loading the page memory and hard disk as standard equipment enables 2 in 1/4 in 1, Electronic sort-
ing and magazine sorting, etc.
• The job build function enables the copying and storing collectively of up to 1,000 original pages by
scanning each page with the optimum original mode or image adjustment and setting the desired fin-
ishing mode.
• A fixing system that uses less oil reduces the amount of oil affixed to the paper.
• By simply replacing the cartridge, you can add toner without dirtying your hands.
• A wide variety of media from thick paper (up to 209 g/m
• Printing and copying on envelopes are also possible.
• Installing an optional finisher offers quick automatic sorting, stapling and hole punching (optional) of
copies.
• Installing a finisher with an optional saddle stitching function attached allows you to select the saddle
stitching mode which will automatically staple the centre of the documents just like a book.
• When the optional printer/scanner kit, both printer kit and scanner kit, or Fax board is installed, the
machine will enter a Sleep mode and will re-activate when a job is received.
*1 This is the value when the room temperature is 20 °C (68 °F) or more at rated power input with no
options installed.
2
), sticker labels, OHP films, etc. is acceptable.
*1
and the
11