Sheet Insertion - Toshiba e-Studio 232 Operator's Manual

10. SHEET INSERTION

This function allows you to insert special sheets of paper (such as colour paper) into the specified pages. 2
kinds of sheets for insertion are available. Up to 50 pages can be specified for [INSERT SOURCE 1] and
[INSERT SOURCE 2] combined. There are 2 types of sheet insertion modes:
1. Inserting a copied sheet into the specified page ([COPIED])
2. Inserting a blank sheet into the page previous to the specified one ([BLANK])
1
2
To make sheet copies, you have to set 2 or 3 drawers (Large Capacity Feeder can also be used) to the
same paper size and orientation (1 or 2 for special insertion sheets and the other for normal sheets of copy
paper).
• To use this function, you need to install the 2nd drawer (if not equipped).
1
Place the special sheets of paper.
P.56 "Drawer for special uses"
• Place the special sheets of paper on the bypass tray or in the drawer selected for sheet insertion.
• Both special sheets of paper and plain paper should be placed in the same direction and be of the same size.
2
Place plain paper in the drawer(s).
3
Place the original(s).
• Originals should be placed from the first page on the original glass.
5
161