Toshiba e-Studio 232 Operator's Manual page 264

5.Print Status Display (Cont.)
2
Place the specified size of paper on the bypass tray, and then press
the [START] button.
• Printing is performed. Press the [JOB STATUS] button when printing is completed.
Printing by placing appropriate size of sheets in the drawer
1
Press the blinking [JOB STATUS] button.
2
Press the drawer button whose size you want to change on the touch
panel.
8
• You can select the desired drawer with the paper source selection ( / ) buttons.
3
Place paper in the corresponding drawer.
262
8.JOB STATUS