Datavideo SE-2000 Instruction Manual page 36

Current_User_Number – current user number (0...5), number 0 corresponds to the Master User which other the
other users settings and adjustments can be linked to.
Input_A, Input_B, PiP_Input – input number currently switched to the multiplexor's Line A, multiplexor's Line B
and PiP shaper input;
Effect – currently set transition effect (curtains):
r FB B1 B0 E3 E2 E1 E0
r- reserved bit,
FB- soft border activation flag(0 – off, 1 – on),
B1, B0- effect border width, 0... 3,
E3 – effect inversion flag(0 – direct, 1 – inverse),
E2, E1, E0- effect number(0... 5);
Speed – number of the pressed key for speed selection (0... 4);
Speed_Value_0, Speed_Value_1, Speed_Value_2, Speed_Value_3, Speed_Value_4 – predefined speed
corresponding to the keys for Speed Selection (4... 64);
Mux_Line_A, Mux_Line_B – the multiplexor's Line A and Line B status:
r r r r r M2 M1 M0
r- reserved bits,
M2, M1, M0 – signal source for the Line(000- selected input (Input_A or Input_B), 001- reserved, 010-
Color Bars, 011- Color Fill defined by Color_Fill parameter);
Bright_Cur – brightness of the last selected source (0x48... 0xb8 with step 8);
Contrast_Cur – contrast of the last selected source (0x24... 0x5c with step 4);
Saturation_Cur – color saturation of the last selected source (0x24... 0x5c with step 4);
X_Lbl_1, X_Lbl_2, X_clock – X-coordinate for Logo 1 or Logo 2 or Clock (0... 62 for 1280x720 screen resolution
or 0... 102 for 1920x1080 screen resolution);
Y_Lbl_1, Y_Lbl_2, Y_clock – Y-coordinate for Logo 1 or Logo 2 or Clock (0... 130 for 1280x720 screen
resolution or 0... 110 for 1920x1080 screen resolution);
Lbl_1_Number – Logo 1 number (0... 13);
Lbl_2_Number – Logo 2 number (0...13);
Background_Number – multiscreen background image number(0...7);
Brightness_Control – keyboard LED brightness factor(0... 1);
Color_Fill – Color Fill number(0... 7);
X_PiP – X-coordinate for PiP (0... 70 for 1280x720 screen resolution or 0... 102 for 1920x1080 screen resolution);
Y_PiP – Y-coordinate for PiP (0... 77 for 1280x720 screen resolution or 0... 113 for 1920x1080 screen resolution);
PiP_Size – PiP size(32... 64);
Luma_Key_Level – Luma Key threshold level(0...255);
Sys_Format – multiscreen resolution (the higher 4 bits) and the output signal system (the lower 4 bits). The
following values are valid:
Mon_1920x1080_i60
Mon_1920x1080_i60
Mon_1920x1080_i60
Mon_1920x1080_i60
Mon_1920x1080_i60
Mon_1920x1080_i60
Mon_1280x720_p60
Mon_1280x720_p60
Mon_1280x720_p60
Mon_1280x720_p60
Mon_1280x720_p60
Mon_1280x720_p60
Mon_1920x1080_i60
Mon_1280x720_p60
Out_1920x1080_i25
Out_1920x1080_i30
Out_1920x1080_i29.95
Out_1280x720_p50
Out_1280x720_p60
Out_1280x720_p59.9
Out_1920x1080_i25
Out_1920x1080_i30
Out_1920x1080_i29.95
Out_1280x720_p50
Out_1280x720_p60
Out_1280x720_p59.9
= 0 Out_1920x1080_i25
= 1 Out_1920x1080_i30
Out_1920x1080_i29.95 = 2
Out_1280x720_p50
Out_1280x720_p60
Out_1280x720_p59.9
= 0
= 1
= 3
= 4
= 5
36