2.8 - Installing the Memory
Before installing memory, ensure that the memory you have is compatible with
the motherboard and processor.
Overview
The motherboard comes with four Double Data Rate 3(DDR3)Dual Inline
Memory Modules (DIMM)sockets.
The figure illustrate the location of the DDR3 DIMM socket.
Sandy Bridge-EP/EX processor supports 4 DDR3 channels
Unbuffered DDR3 and registered DDR3 DIMMs
LR DIMM (Load Reduced DIMM) for buffered memory solutions demanding
higher capacity memory subsystems
Memory DDR3 data transfer rates of 800, 1066, 1333, and 1600 MT/s
All installed memory will automatically be detected and no jumpers or settings
need changing.
All memory must be of the same type and density.
Always populate the memory starting from DIMMA0 first.
Check the TYAN
recommended for your motherboard.
®
Web site at:
www.tyan.com
http://www.TYAN.com
for details of the type of memory
38