Jøtul GF300 DV IPI Allagash Installation And Operation Instructions Manual page 32

139495_Rev_C GF 300 DV IPI 9/11/12
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat.
The thermostat can be set to a desired temperature to
control the comfort level in a room.
To activate this function, press the Thermostat Key. The

display will indicate that the room thermostat is "ON"
and the current Set Temperature is now displayed. Fig. 61.
To adjust the Set Temperature, press the Up or Down

Arrow Keys until the desired Set Temperature is dis-
played. Fig. 62.
SMART Thermostat Function
This function adjusts the flame intensity according to the
difference in the Set Point temperature and the actual
room temperature. As the room temperature gets closer
to the Set Point, the Smart Function will modulate flame
intensity down.
To activate this function, press the Thermostat Key

until the word "SMART" appears to the right of the
thermometer bulb icon. Fig. 63.
To adjust the temperature, press the Up or Down Arrow

Keys until the desired Set Temperature is displayed. Fig.64.
Fan Control
The fan speed can be adjusted through six settings. To
activate this function, press the Mode Key to index to
the Fan Control icon. See fig. 65. The fan will not func-
tion at all if it is not first set to ON.
Use the Up/Down Arrow Keys to turn ON, OFF, or ad-

just the fan speed. Fig. 66. A single "beep" will confirm
reception of the command. After a 5 minute interval,
the fan will power up to its highest speed and then
modulate down to the established fan speed setting.
The fan will continue to operate for 12 minutes after
the burner is turned off. Manual speed control is not
available when the SMART Thermostat is ON.
Accent Lamp Control
With the Remote ON, press the Mode Key to index to

the Lamp icon. Figs. 67-68.
Pressing the Up Arrow Key will turn the Lamp ON. Press

the arrow keys to adjust the brightness.
Pressing the Down Arrow Key will turn the Lamp OFF.

Child Safety Lock
This function will lockout the Transmitter to prevent un-
supervised operation.
To activate the Lock, press the Mode key and UP Key at

the same time. Fig. 69.
To de-activate the Lock, press the Mode Key and UP Key

at the same time.
32
Set Temperature
Figure 61. Thermostat ON.
Figure 63. Smart Mode
Figure 65. Fan Mode.
Figure 67. Lamp Control.
Figure 69. Lock ON.
Room Temperature
Figure 62. Change Set
Temperature.
Figure 64. Smart Set Temp.
Figure 66. Fan Speed.
Figure 68. Lamp ON.
Figure 70. Low Battery.