Audio/Usb Board - HP ENVY 17 Maintenance And Service Manual

6. Remove the three Phillips PM2.5×3.6 screws (2) that secure the keyboard to the top cover.
7. Slide the keyboard (3) toward the top edge of the top cover until the tabs on the sides of the
keyboard disengage from the slots built into the left and right sides of the top cover (4).
8. Remove the keyboard (5).
Reverse this procedure to install the keyboard.

Audio/USB board

Description
Audio/USB board (includes cable)
Before removing the audio/USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a.
Subwoofer (see
b. Hard drive (see
c. Top Cover (see
56 Chapter 4 Removal and replacement procedures
Battery on page 35), and then remove the following components:
Subwoofer on page 37)
Hard drive on page 47)
Top cover on page 52)
Spare part number
665920-001