HP ENVY 17 Maintenance And Service Manual page 63

Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Subwoofer (see
b. Hard drive (see
c. Top Cover (see
Remove the keyboard:
1. Turn the top cover upside down, with the front toward you.
2. Remove the five Phillips PM2.5×3.6 screws (1) that secure the keyboard bracket to the top cover.
3. Slide the keyboard bracket (2) toward the top edge of the top cover until the five tabs (3) on the
bottom edge of the bracket disengage from the top cover.
4.
Remove the keyboard bracket (4). The keyboard bracket is available using spare part number
665910-001.
5. Release the keyboard light cable (1) from the top cover. (The keyboard light cable is attached to
the top cover with double-sided adhesive.)
Battery on page 35), and then remove the following components:
Subwoofer on page 37)
Hard drive on page 47)
Top cover on page 52)
Component replacement procedures
55