Wireless Audio Module - HP ENVY 17 Maintenance And Service Manual

Wireless audio module

Description
Wireless audio module
Before removing the wireless audio module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Disconnect the battery cable from the system board (see
5. Remove the hard drive (see
Remove the wireless audio module:
1. Disconnect the wireless audio module antenna cables from the terminals on the wireless
audio module.
NOTE:
audio module "1" terminal. The 8/Aux/yellow wireless audio module antenna cable is connected
to the wireless audio module "2" terminal.
50 Chapter 4 Removal and replacement procedures
Hard drive on page
The 7/Main/purple wireless audio module antenna cable is connected to the wireless
Battery on page
47).
Spare part number
668115-001
35).