Display Assembly - HP ENVY 17 Maintenance And Service Manual

2. Lift the processor (2) straight up, and remove it.
NOTE:
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.

Display assembly

NOTE: The display assembly spare part kit includes the display panel cable, webcamera/
microphone module and cable, and 2 wireless antenna cables and transceivers.
Description
17.3-in, FHD, AG, LED, FG, 3D display assembly in natural silver finish
17.3-in, FHD, AG, LED, FG, 3D display assembly in natural silver finish with Bluetooth module
(includes Bluetooth module and cable)
17.3-in, FHD, AG, LED, FG, 2D display assembly in natural silver finish
17.3-in, FHD, AG, LED, FG, 2D display assembly in natural silver finish with Bluetooth module
(includes Bluetooth module and cable)
17.3-in, HD, AG, LED, FG, 2D display assembly in natural silver finish
17.3-in, HD, AG, LED, FG, 2D display assembly in natural silver finish with Bluetooth module
(includes Bluetooth module and cable)
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
The gold triangle (3) on the processor must be aligned with the triangle icon (4)
Spare part number
665913-001
668995-001
665912-001
668994-001
665911-001
668993-001
Component replacement procedures
73