B For Long Mode - Sanyo VCC-6974 Instruction Manual

USING THE MENU SCREEN
B For LONG mode
1
Press the CURSOR (l, then d or c) button to change the SHUTTER setting to
"LONG" (the setting will flash), then press the SET button.
The ADJUSTMENT FOR ES screen will be displayed.
2
Press the CURSOR (d or c) button to change the shutter speed.
Returning to the default setting
Press the CURSOR (l, then d or c) button to change the PRESET setting to ON, then
press the SET button.
3
When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen.
Then press the CURSOR (d or c) button to change BACK to END, and press the SET
button.
To return to the previous screen, select BACK then press the SET button.
Note:
•
When MOTION is set to ON, LONG mode cannot be selected.
•
When filming moving subjects, the higher the SHUTTER SPEED setting (acceleration),
the more pronounced afterimage will be visible. Also, when the acceleration is high,
white dots will be visible on the screen, this is due to the CCD characteristics.
• When the SENSE UP setting is used (setting other than OFF), the SHUTTER SPEED
cannot be set. Also, the SHUTTER item setting will be forced to OFF.
35
English
SHUTTER/LONG
MAIN MENU
LANGUAGE
CURSOR
SET
CAMERA ID
SYNC
IRIS
WHITE BALANCE
SHUTTER
ADJUSTMENT FOR ES
SHUTTER SPEED
CURSOR
X1 X2 X4 X8
CURSOR
SET
MENU
MENU
SET p
OFF
INT
AI p
ATW p
LONG p
X1
X16 X32
BACK
END