Sanyo VCC-6974 Instruction Manual page 18

USING THE MENU SCREEN
4
Press the CURSOR (l) button to select "SET" as the POSITION setting (the setting
will flash), then press the SET button.
The CAMERA ID SETTING screen will be displayed, and the set camera ID will flash at the
position currently set.
5
Press the CURSOR (d, c, j or l) button to determine the display position, then
press the SET button.
The display will return to the CAMERA ID SETTING screen.
NOTE: If the CAMERA ID is reset (using the menu PRESET setting), its position will also be
reset to the default position (right bottom corner).
6
When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen.
Then press the CURSOR (d or c) button to change BACK to END, and press the SET
button.
To return to the previous screen, select BACK then press the SET button.
17
English
CAMERA ID SETTING
CURSOR ABCDEFGHIJKLM
SET
NOPQRSTUVWXYZ
0123456789 :-
CAMERA ID IS
POSITION
CURSOR
SET
CURSOR
SET
MENU
SET
MENU
CAMERA ID
BN1?????
SET p
BN1
BACK
END