Sanyo VCC-6974 Instruction Manual page 24

USING THE MENU SCREEN
Adjust the IRIS LEVEL setting (DC type lens only)
Press the CURSOR (l) button so that the IRIS LEVEL value is flashing, then press the CURSOR
(d or c) button to adjust the IRIS LEVEL setting.
The larger the value, the greater the iris level.
Returning the value to the default setting
Press the CURSOR (l, then d or c) button to change the PRESET setting to ON, then press
the SET button.
When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen. Then
press the CURSOR (d or c) button to change BACK to END, and press the SET button.
To return to the previous screen, select BACK then press the SET button.
BLC setting
The following two types of BLC adjustment can be carried out
MULTI (multi-spot photometry):
Brighter sections of the background are masked so that they do not affect photometry
detection. Brighter sections of the background are determined on-screen, and they are masked
so that they are in a position which do not affect the main subject (such as a person).
Note: If using a VIDEO type lens, the MULTI mode setting cannot be used.
EVAL (5-section photometry):
Photometry and backlight correction are carried out so that the optimum image can be
obtained, even if the subject's background is too bright.
23
English
AI/BLC•IRIS LEVEL
ADJUSTMENT FOR AI
CURSOR LENS TYPE
BLC
SENSE UP
[IRIS LEVEL]
í--ú---z------ü
CURSOR
SET
MENU
MENU
ADJUSTMENT FOR AI
LENS TYPE
BLC
DC
OFF
OFF
30
BACK
END
VIDEO
EVAL p
OFF