Download  Print this page

Sanyo Xacti VPC-603 Owner's Manual

6-megapixel digital camera.
Hide thumbs

Advertisement

FCC STATEMENT (For customers in USA)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Note:
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
EN-1

Advertisement

   Related Manuals for Sanyo Xacti VPC-603

   Summary of Contents for Sanyo Xacti VPC-603

  • Page 1 FCC STATEMENT (For customers in USA) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
  • Page 2: Read This First

    READ THIS FIRST Trademark Information ® Microsoft and Windows ® Pentium is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Computer, Inc. SD™ is a trademark. Photo Explorer and Photo Express are trademarks. Other names and products may be trademarks or registered trademarks of their respective owners. Product Information Product design and specifications are subject to change without notice.
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. Warnings If foreign objects or water have entered the camera, turn the power OFF and remove the batteries and the AC power adapter. Continued use in this state might cause fire or electric shock. Consult the store of purchase. If the camera has fallen or its case has been damaged, turn the power OFF and remove the batteries and the AC power adapter.
  • Page 4 Cautions Insert the batteries paying careful attention to the polarity (+ or –) of the terminals. Inserting the batteries with their polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone’s eyes.
  • Page 5 Notes on Battery Usage When you use the batteries, carefully read and strictly observe the Safety Instructions and the notes described below: Different battery types and surrounding temperatures may affect the battery performance. Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce camera performance.
  • Page 6: Table Of Contents

    Contents INTRODUCTION...8 Package Contents ... 9 GETTING TO KNOW YOUR CAMERA...10 Front View... 10 Rear View ... 11 Mode Dial... 12 LCD Monitor Information... 13 PREPARING THE CAMERA...16 Installing the Batteries ... 16 Using the AC Adapter (Optional Accessory)... 17 Inserting and Removing an SD Memory Card (Optional Accessory) ...
  • Page 7 PLAYBACK MODE - THE BASICS... 39 Viewing Images ... 39 Magnifying Images ... 40 Thumbnail Display... 41 Slideshow Display ... 42 Resizing an Image ... 43 MOVIE MODE ... 44 Recording Movie Clips ... 44 Playing Back Movie Clips ... 45 PLAYBACK MODE - ADVANCED FEATURES.
  • Page 8: Introduction

    INTRODUCTION Thank you for purchasing the new digital still camera! Equipped with a 6.0 Megapixels CCD sensor, your camera delivers high quality, 2816 x 2112 resolution images. Other features provided by the camera include the following: 6.0 Megapixels A high-resolution CCD sensor provides 6.0 megapixels for high quality images.
  • Page 9: Package Contents

    Package Contents Carefully unpack your kit box and ensure that you have the following items. In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer. Common Product Components: Digital Camera User's Manual Software CD-ROM Camera Strap...
  • Page 10: Getting To Know Your Camera

    GETTING TO KNOW YOUR CAMERA Front View 1. Shutter release button 2. Flash 3. Power switch 4. Mode dial 5. Self-timer LED EN-10 6. Microphone 7. PC / AV terminal 8. DC input terminal 9. Lens...
  • Page 11: Rear View

    Rear View 1. LED indicator Zoom in (telephoto) button Zoom out (wide-angle) button Playback button 4. MENU Menu button Delete button Arrow button (Up) Self-timer button Arrow button (Right) Focus button 8. Strap holder Arrow button (Down) Exposure compensation button Arrow button (Left) Flash button button...
  • Page 12: Mode Dial

    Mode Dial You can select from seven shooting modes and setup mode according to shooting conditions to achieve the desired effect. Mode Program Portrait Landscape Sports Night Setup Video Auto EN-12 Description Select this mode to permit the shutter speed and aperture to be set manually. Select this mode to make people stand out with the background out-of-focus.
  • Page 13: Lcd Monitor Information

    LCD Monitor Information Camera Mode 1. Mode indication ] Program Mode ] Portrait Mode ] Landscape Mode ] Sport Mode ] Night Mode ] Setup Mode ] Movie Mode ] Auto Mode 2. Flash mode ] Auto ] Red eye ] Flash on ] Flash off 3.
  • Page 14: Battery Power And Ac Adapter Indicator 1/7

    Movie Mode 1. Movie mode 2. Flash mode 3. Recordable movie time available 4. Memory status 5. Battery power and AC adapter indicator 6. Focus area 7. Zoom bar Image Playback 1. Playback mode 2. Number of image 3. Memory status 4.
  • Page 15 Movie Playback 1. Playback mode 2. Movie mode 3. Number of movie 4. Memory status 5. Battery power and AC adapter indicator 6. Index number of total number 7. Elapsed time 8. Date 9. Time 10. Play/Pause indicator 100-0001 100-0001 100-0001 00:05 00:05...
  • Page 16: Preparing The Camera

    PREPARING THE CAMERA Installing the Batteries You can use 2 AA size batteries (alkaline or Ni-MH rechargeable) to power the camera. Make sure that the power of the digital camera is off before inserting or removing the batteries. 1. Make sure the camera is turned off. 2.
  • Page 17: Using The Ac Adapter (optional Accessory)

    Using the AC Adapter (Optional Accessory) Use of the AC adapter is recommended if you intend to use the LCD monitor for a long time or connect the camera to a PC. 1. Make sure your camera is off. 2. Connect one end of the AC adapter to the camera DC input terminal labeled "DC IN 3V". 3.
  • Page 18: Inserting And Removing An Sd Memory Card (optional Accessory)

    Inserting and Removing an SD Memory Card (Optional Accessory) The digital camera comes with 11MB of internal memory, allowing you to store captured still images or video clips in the digital camera. Moreover, you can also expand the memory capacity by using an optional SD (Secure Digital) memory card so that you can store more files.
  • Page 19: Attaching The Camera Strap

    Attaching the Camera Strap Attach the strap as shown in the illustration. EN-19...
  • Page 20: Getting Started

    GETTING STARTED Turning the Power On/Off Press the power switch until the digital camera turns on. To turn the power off, press the power switch again. EN-20 Power switch...
  • Page 21: Choosing The Screen Language

    Choosing the Screen Language Follow the steps below to choose the desired language. 1. Rotate the mode dial to the power switch. 2. [Set-up1] is displayed. 3. Use the four-way controller ( ) to select [Language], then press button. 4. Use the four-way controller ( 5.
  • Page 22: Setting The Date And Time

    Setting the Date and Time Follow the steps below to set the date display style, current date and time. 1. Rotate the mode dial to the power switch. 2. [Set-up1] is displayed. 3. Use the four-way controller ( ) to select [Date & Time] and the four-way controller ( button.
  • Page 23: Formatting An Sd Memory Card Or Internal Memory

    Formatting an SD Memory Card or Internal Memory The term “Formatting” means preparing an “SD memory card” to record images; this process is also called “initialization”. This utility formats an SD memory card or the internal memory and erases all stored images and data.
  • Page 24: Using The Lcd Monitor

    Using the LCD Monitor Your camera is equipped with a 2.4” full color TFT LCD monitor to help you compose images, replay recorded images/movie clips or adjust menu settings. The mode icons, text and numbers displayed on the monitor may vary according to the current settings.
  • Page 25: Photography Mode

    PHOTOGRAPHY MODE Shooting Images 1. Rotate the mode dial to camera on by pressing the power switch. 2. Compose the image on the LCD monitor screen so that the main subject is within the focus frame. 3. Press the shutter release button down halfway to focus the image. When you press the shutter release button down halfway, the camera’s Auto Focus feature automatically focuses the image.
  • Page 26: Setting Image Resolution And Quality

    Setting Image Resolution and Quality As you get to know the digital camera, you can set the image resolution (number of vertical and horizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot.These settings affect the number of images that can be stored in the internal memory, or on an SD memory card.
  • Page 27: Using The Zoom Function

    Using the Zoom Function This camera is equipped with 3x optical zoom. The lens moves during the optical zoom photography, allowing you to capture telephoto and wide-angle shots. By using the optical zoom function; images appear closer by pressing the button, or smaller away by pressing the The zoom bar indicates the current level of magnification.
  • Page 28: Using The Flash

    Using the Flash The flash is designed to function automatically when lighting conditions warrant the use of flash. You can take an image using a desired flash mode to suit your circumstances. 1. Rotate the mode dial to 2. Press the power switch to turn on the power. 3.
  • Page 29: Setting Focus

    Setting Focus Images can be captured with the focus determined automatically using auto focus. You may over-ride the auto focus and specify [ ] macro or [ 1. Rotate the mode dial to 2. Press the power switch to turn on the power. 3.
  • Page 30: Capture Mode

    CAPTURE MODE Burst This mode is used for continuous shooting. 3 pictures are taken continuously once the shutter release button is pressed. Secure the camera to a tripod or place it on a stable surface. 1. Rotate the mode dial to 2.
  • Page 31: Auto Bracket

    Auto Bracket In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter release button once. Auto Bracket settings can be combined with exposure compensation settings to extend the adjustment range. 1.
  • Page 32: Self-timer

    Self-Timer The self-timer can be used in situations such as group shots. When using this option, you should either mount the camera on a tripod (recommended) or rest it on a flat, level surface. 1. Secure the camera to a tripod or place it on a stable surface. 2.
  • Page 33 The table below will help you choose the appropriate self-timer mode: Self-timer mode Description 2 sec. Self-timer The image is captured about 2 seconds after the shutter is pressed. This mode is useful for preventing camera shake. 10 sec. Self-timer The image is captured about 10 seconds after the shutter is pressed.
  • Page 34: Adjusting The Exposure (ev Compensation)

    Adjusting the Exposure (EV Compensation) You can manually adjust the exposure determined by the digital camera. Use this mode when the proper exposure cannot be obtained, for example, when the contrast (difference between bright and dark areas) between the subject and the background is extremely high. The EV compensation value can be set from -2.0EV to +2.0EV.
  • Page 35: Setting White Balance

    Setting White Balance This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions. 1. Rotate the mode dial to 2. Press the power switch to turn on the power. 3. Press the MENU button. [Mode1] is displayed. 4.
  • Page 36: Using The Mode Dial

    USING THE MODE DIAL Auto Mode [ (Auto) mode is the simplest way which allows you to take still pictures without having to set special functions or manual adjustments. The camera sets the optimal focusing and exposure. 1. Rotate the mode dial to the power switch.
  • Page 37: Portrait Mode [ ]

    Portrait Mode [ Select this mode to make people stand out with the background out-of-focus. 1. Rotate the mode dial to the power switch. 2. Compose your subject within the focus frame. 3. Press the shutter release button to capture the image. Landscape Mode [ This mode allows you to take photographs of distant scenery or landscapes.
  • Page 38: Sport Mode

    Sport Mode [ This mode allows you to shoot fast moving objects. 1. Rotate the mode dial to the power switch. 2. Compose your subject within the focus frame. 3. Press the shutter release button to capture the image. Night Mode [ This mode allows you to take photographs of people against a dusk or night-time background.
  • Page 39: Playback Mode - The Basics

    PLAYBACK MODE - THE BASICS Viewing Images You can display the still images one by one. 1. Rotate the mode dial to your camera on by pressing the power switch. 2. Press the button. The last recorded image appears on the LCD monitor screen. Basic information is shown by indicators on the LCD monitor screen.
  • Page 40: Magnifying Images

    Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to view fine details. The zoom factor displayed on the screen shows the current magnification ratio. 1. Press the button. The last recorded image appears on the LCD monitor screen. To view the previous image, press the four-way controller ( ).
  • Page 41: Thumbnail Display

    Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor screen simultaneously so you may search for a particular image. 1. Press the button. The last recorded image appears on the LCD monitor screen. 2. Press the button once.
  • Page 42: Slideshow Display

    Slideshow Display The slideshow function enables you to play your images back automatically in sequential order. This is very useful and entertaining feature for reviewing recorded images and for presentations. 1. Press the button. The last recorded image appears on the LCD monitor screen. 2.
  • Page 43: Resizing An Image

    Resizing an Image You can change the image size of a captured image to one of the following sizes: 2272 x 1704 pixel, 1600 x 1200 pixel and 640 x 480 pixel. 1. Press the button. The last recorded image appears on the LCD monitor screen. 2.
  • Page 44: Movie Mode

    MOVIE MODE Recording Movie Clips This mode allows you to record movie clips with sound via built-in microphone. 1. Rotate the mode dial to the power switch. 2. Press the shutter release button to start recording. 3. To stop recording, press the shutter release button again. The optical zoom function (3X) can be activated before you start recording the movie clips The digital zoom function can be activated before and during the recording.
  • Page 45: Playing Back Movie Clips

    Playing Back Movie Clips You can play back the recorded movie clips on the LCD monitor screen. However, the sound recorded with movie clips can only be played back on a TV or on a computer. 1. Press the button. 2.
  • Page 46: Playback Mode - Advanced Features

    PLAYBACK MODE - ADVANCED FEATURES Playing Back Still Images/Movie Clips on TV You can also playback your images on a TV screen. Before connecting to any device, make sure to select NTSC/PAL system to match the video output system of the video equipment you are going to connect to the digital camera, then turn off all devices to be connected.
  • Page 47: Deleting Images/movie Clips

    Deleting Images/Movie Clips Use this function to delete one or all images/movie clips stored in SD memory card or the internal memory. Please note that the deleted images or movie clips cannot be recovered. Exercise caution before deleting a file. 1.
  • Page 48: Protecting Images/movie Clips

    Protecting Images/Movie Clips Set the data to read-only to prevent images from being erased by mistake. 1. Press the button. The last recorded image appears on the LCD monitor screen. 2. In the mode, use the four-way controller ( desired images. To view the previous image, press the four-way controller ( ).
  • Page 49: Setting The Dpof

    Setting the DPOF DPOF (Digital Print Order Format) allows you to embed printing information on your SD memory card. By using DPOF, you can select an image to be printed and then specify how many prints or which image you would like.
  • Page 50 4. Use the four-way controller ( press the button. [Quantity]: Allows you to select image quantity (0~10). Use the four-way controller ( [Date]: The date of recording can be printed directly on the images. Select [Yes] or [No] with the four-way controller ( 5.
  • Page 51: Connecting To A Pictbridge-compatible Printer

    Connecting to a PictBridge-Compatible Printer Even if you do not have a computer, you can connect the camera directly to a printer that supports PictBridge to perform image selection and printing using the camera screen and controls. DPOF support also lets you specify which images you want to print and how many copies of each should be printed.
  • Page 52: Date

    Printing images When the camera is properly connected to a PictBridge-compatible printer, the [Printing Mode Select] screen is displayed on the LCD monitor screen. Use the four-way controller ( In [Print] Mode: Lets you print the specified image with PictBridge. 1.
  • Page 53 4. After Print Setting is set, the print icon image. You can still use the four-way controller ( image by your preference, then press the 5. Use the four-way controller ( setting, then press the button to confirm. [Size]: You may select the desired item depending on the type of printer being used.
  • Page 54 In [Print All] Mode: Lets you print all images with PictBridge. 1. If you wish to print all the images stored in the camera, you may choose [Print All] in [Printing Mode Select]. 2. To set Print Settings, follow steps 2 to 6 in [Print] Mode.(EN-52) In [Print With DPOF] Mode: This function only lets you print the specified image based on the previous DPOF settings.
  • Page 55: Transferring Files From Your Digital Camera To Computer

    TRANSFERRING FILES FROM YOUR DIGITAL CAMERA TO COMPUTER After using USB cable to establish a USB connection between the camera and your computer, you can use your computer to share recorded images or video clips with your family or friends via e-mail or post them on the Web.
  • Page 56: Step 1: Install The Usb Driver

    Step 1: Install the USB driver Installation on Windows 98 & 98SE The USB driver on the supplied CD-ROM is exclusively for Windows 98 and 98SE. Windows 2000/ME/XP users need not install the USB driver. 1. Insert the enclosed CD-ROM into your CD-ROM drive. 2.
  • Page 57: Step 2: Connect The Digital Camera To Your Computer

    Step 2: Connect the digital camera to your computer 1. Rotate the mode dial to the power switch. 2. Press the four-way controller ( ) to select the [Set-up2] menu, then use the four-way controller ( ) to select [USB Mode]. 3.
  • Page 58 Step 3: Download images or movie clips When the digital camera is turned on and connected to your computer, it is considered to be a disk drive, just like a floppy disk or CD. You can download (transfer) images by copying them from the “Removable disk” (“untitled”...
  • Page 59: Editing Software Installation

    EDITING SOFTWARE INSTALLATION Installing Photo Explorer Ulead® Photo Explorer provides a simple and efficient way to transfer, browse, modify and distribute digital media. Acquire photos, video or sound clips from various digital device types and easily browse or add personal descriptions; make timely modifications; or distribute the media through the medium of your choice: E-mail, Print, Slideshow Presentations.
  • Page 60: Installing Photo Express

    Installing Photo Express ® Ulead Photo Express is complete photo project software for digital images. The step-by-step workflow, visual program interface, and in-program help assist users in creating exciting photo projects. Acquire digital photos effortlessly from digital cameras or scanners. Organize them conveniently with the Visual Browse mode.
  • Page 61: Using The Digital Camera As A Pc Camera

    USING THE DIGITAL CAMERA AS A PC CAMERA Your digital camera can act as a PC camera, which allows you to videoconference with business associates, or have a real-time conversation with friends or family. To use the digital camera for videoconferencing, your computer system must include the items as below: Microphone Sound card...
  • Page 62: Step 2: Connect The Digital Camera To Your Computer

    Step 2: Connect the digital camera to your computer 1. Rotate the mode dial to the power switch. 2. Press the four-way controller ( ) to select the [Set-up2] menu, then use the four-way controller ( ) to select [USB Mode]. 3.
  • Page 63: Step 3: Run Your Application Software (i.e. Windows Netmeeting)

    Step 3: Run your application software (i.e. Windows NetMeeting) To use Windows NetMeeting for videoconferencing: Start Programs Go to program. 2. Click the Start Video button to view live video. 3. Click the Place Call button. 4. Type the e-mail address or the network address of the computer that you are calling. 5.
  • Page 64: Menu Options

    MENU OPTIONS Camera Menu This menu is for the basic settings to be used when capturing still images. Aut uto Auto Image Size Image Si ge Size Quality Quality Quality Return : Retu eturn n : Select : Select : Select : 1.
  • Page 65 In the Mode Item Functional Description Image Size Sets the size of the image that will be captured. Refer to the section in this manual titled "Setting Image Resolution and Quality" (EN-26) for further details. 2816x2112 2272x1704 1600x1200 640x480 Quality Sets the quality (compression rate) at which the image is captured.
  • Page 66 In the , or Mode1 settings Item Functional Description Image Size Refer to the section in this manual titled “Setting Image Resolution and Quality” (EN-26) for further details. Quality Refer to the section in this manual titled “Setting Image Resolution and Quality” (EN-26) for further details.
  • Page 67 Mode2 settings Item Functional Description Metering You can select the metering mode that sets which part of the subject to measure to determine the exposure. Center-weighted: Averages the light metered from the entire frame, but gives greater wieght to the subject matter at the center. Spot: The exposure is determined by the small area in the center of the screen only.
  • Page 68 Mode3 settings Item Functional Description Color Sets the color of the image that will be captured. Full Color Black & White Sepia Sharpness Sets the level of image sharpness. High Medium Saturation To capture an image, your camera offers you three different degrees of color to match with your preference.
  • Page 69: Movie Menu

    Movie Menu This menu is for the basic settings to be used when recording movie clips. Video Vide ideo Color Color Color Digital Zoom Digital Zoom Digital Zoom Retu Return : eturn n : MENU MENU MENU Select : Select : Select : 1.
  • Page 70: Playback Menu

    Playback Menu In the menu, set the settings used for playback. Playback1 Playba Playback1 Playba Playback2 Playback2 Slide Show Slide Sh Slide Show Protect Protec otect DPOF DPOF DPOF Return : Retu eturn n : MENU MENU MENU Select : Select : Select : 1.
  • Page 71 Playback1 Item Functional Description Slide Show You can play back recorded images in order with a selected interval time. This function is useful for checking your images or for presentations, etc. Refer to the section in this manual titled “Slideshow Display” (EN-42) for further details. 3 Sec.
  • Page 72 Playback2 Item Functional Description Resize Changes the size of a recorded image. Resizing replaces the original image with the changed image. Only resizing to a smaller size is available. Refer to the section in this manual titled “Resizing an Image” (EN-43) for further details 2272x1704 1600x1200...
  • Page 73: Setup Menu

    Setup Menu This feature allows you to set up the default settings by preference for using your camera. Set-up1 Set-up1 Set-up1 Set-up2 Set-up2 Set-up2 Set-up3 Set-up3 Set-up3 Format Format Beeper Beeper Beeper Louder Louder Louder Date & Time Date & Tim te &...
  • Page 74 Set-up1 settings Item Functional Description Format Erases all images and reformats the SD memory card loaded in your camera. Protected images are also erased. SD memory card cannot be formatted if it is write-protected. Refer to the section in this manual titled “Formatting an SD Memory Card or Internal Memory”...
  • Page 75 Set-up2 settings Item Functional Description USB Mode Selects to choose one of the following modes for further settings. PC / PictBridge / PC CAM Sets video output of the camera for matching the video output system of the equipment that you are going to connect to the camera. PAL / NTSC This sets the brightness of the LCD monitor screen.
  • Page 76 Set-up3 settings Item Functional Description Reset Number. Sets whether or not to reset the file number when you take photographs. This creates a new folder. The captured images are recorded to the newly created folder from number 0001. If you want to reset the file number, be sure that no images are recorded in the internal memory or the SD memory card.
  • Page 77: Connecting The Digital Camera To Other Devices

    CONNECTING THE DIGITAL CAMERA TO OTHER DEVICES EN-77...
  • Page 78: Specifications

    SPECIFICATIONS Item Description Image Sensor Effective pixels 6.0 Mega pixels Image size Still image: 2816x 2112, 2272 x 1704, 1600 x 1200, 640 x 480 Movie clip: 320 x 240, 20fps Image quality Still image: Fine / Normal / Economy Movie image: QVGA Recording media Approx.
  • Page 79 Item Description Self-timer 10 sec self-timer, 2 sec self-timer, 10+2 sec self-timer Exposure compensation -2.0EV~ +2.0EV (in 1/3 EV increments) White balance Auto, Daylight, Cloudy, Tungsten, Fluorescent Auto, 64, 100, 200 Interface DC input terminal, PC/AV terminal Power 2 x AA (alkaline or Ni-MH rechargeable) batteries AC-DC Adapter (3V/2.5A) (Optional) Dimension Approx.
  • Page 80: Appendix

    APPENDIX Troubleshooting Guide Symptom Possible causes Power does not turn * The batteries have run out. * The batteries are not oriented correctly. * The battery cover is not closed properly. * The AC adapter (optional) is Camera suddenly * The function of [Auto Shut Down] in the powers down.
  • Page 81 Symptom Possible causes Flash does not fire. * Flash off is selected in flash mode. * 10+2 sec. Self-timer is selected in self-timer mode. * The [Capture Mode] is set to [Burst] or [AEB]. * The camera is in the Continuous shooting is * The capacity of the built-in memory or not possible.
  • Page 82 Possible Number of Recordable Image The frame counter indicates the approximate number of images that can be stored on the internal memory and the SD memory card. The number of recordable images may vary depending on the recorded subject, the capacity of the memory card, if there are files other than images or when the recording is made while switching the picture quality or resolution.

Comments to this Manuals

Symbols: 0
Latest comments: