Sync Settings; A Internal Synchronization Setting (Int) - Sanyo VCC-6974 Instruction Manual

USING THE MENU SCREEN

SYNC settings

The following three types of synchronization settings can be carried
out.
A
Internal synchronization (INT)
Generates a sync signal for internal camera use.
B
Power supply synchronization (L - L: line-lock)
Matches the vertical sync signal for the camera with the
frequency of the AC power supply.
C
External sync (VBS)
Matches the camera's sync signal with the sync signal from an
external source.
Internal synchronization setting (INT)
A
1
Press the SET button for about 3 seconds.
The MAIN MENU screen will be displayed.
2
Press the CURSOR (l, then d or c) button to change the
SYNC setting to "INT" (the setting will flash).
3
When finished:
Press the CURSOR (l) button until END is flashing at the bottom
of the screen, then press the SET button.
The display will return to the monitor screen.
MAIN MENU
SET
LANGUAGE
CAMERA ID
SYNC
CURSOR
SET
MENU
SYNC/INT
SET p
OFF
INT
END
18
English