Clearing A Paper Jam Caused By A Wrong Paper Size Setting - Toshiba E-Studio 2330c Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
6
Join the Finisher to the equipment.
Move the Finisher slowly toward the equipment, placing both of
your hands on the front and the back of the Finisher.

Clearing a paper jam caused by a wrong paper size setting

A paper jam occurs when there is a mismatch between the size of the paper in a drawer or the bypass tray and the size
configured for the drawer or the bypass tray in the equipment. The message "Check paper size setting on control panel for
drawer N" or "Check paper size setting on control panel for the bypass tray" appears on the touch panel.
In this case, just removing the jammed paper does not prevent another paper jam. Be sure to follow the procedure below.
During the operation, the guidance for clearing the paper jam on the touch panel is not displayed. Take notes of the
following before operation: where the paper jam has occurred and in which drawer the paper setting is wrongly registered.
Troubleshooting depends on where and how the paper jam has occurred:
P.31 "Jam when making copies (using a drawer)"
P.33 "Jam when making copies (using the bypass tray)"
P.34 "Jam when printing from the FAX or the printer (using a drawer)"
P.36 "Jam when printing from the printer (using the bypass tray)"
Jam when making copies (using a drawer)
1
Turn off the main power switch.
Shutting down on the control panel is not possible in this case.
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 31