Toshiba E-Studio 2330c Troubleshooting Manual page 105

TopAccess Message
Authentication Method mismatch
IKE Version mismatch
Encapsulation mode mismatch
Peer IP Address mismatch
Local IP Address mismatch
Local ID mismatch
Remote ID mismatch
IKEv1/IKEv2 Timed out
It succeeded in the acquisition of the certificate
An unknown error occurred by SCEP
Timeout error
file save error
SCEP operation is failed
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Corrective Action
Mismatch in IKE authentication type. Check the Authentication
type in MFP and peer.
Mismatch in IKE version. Check the IKE version in MFP and peer.
Check the IPsec mode (Transport/Tunnel) in MFP and peer.
Remote Traffic selector mismatch. Check the destination address/
port in IPsec filter.
Local traffic selector mismatch. Check the source address/port in
IPsec filter.
Check the user certificate in MFP.
Check the user certificate in peer machine.
Check the network connectivity between MFP and peer machine.
Select the Flush Connections Option and retry.
It succeeded in the acquisition of the certificate.
Verify the Network Settings again and retry generating certificates.
1) Check the IP address / FQDN of the CA server and verify the
Network Settings.
2)Increase the timeout value and retry generating certificates
again.
Try re-generating the certificates again.
Check the challenge phrase.It may be because of the wrong
challenge phrase.
Error Messages 103