Chapter 8 When Something Is Wrong With The Equipment; When You Think Something Is Wrong With The Equipment; General Operations - Toshiba E-Studio 2330c Troubleshooting Manual

8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT

When You Think Something Is Wrong With the Equipment

If you think there is something wrong with the equipment, check the following items.
To see the functions of the equipment such as copy or print, refer to their operator's manuals (Copying Guide and
Printing Guide respectively).
Checking the operations or procedures may help you solve the problems. When you have found what is not clear in
operating the equipment or you think something is wrong with it, the operator's manual for the function you are
using will be helpful.

General operations

Problem Description
The equipment does not work at
all.
No icons or signs are displayed
on the touch panel.
The touch panel is dim.
The button does not respond to
my operation.
The window "Enter Department
Code" appears.
The window "Enter the user
name and Password" appears.
A message is displayed on the
touch panel.
114

When You Think Something Is Wrong With the Equipment

Cause
The power cord is not securely
inserted into the outlet.
The equipment is in the Energy Saver
mode.
The equipment has been turned off by
the weekly timer.
The contrast of the touch panel has
been adjusted too darker.
The equipment is in the Energy Saver
mode.
The equipment has been turned off by
the weekly timer.
The equipment has not been ready
since it was turned on.
The equipment is managed under the
department management function.
The equipment is managed under the
user management function.
A problem has occurred in the
equipment (or the message is
displayed just for an ordinary
operation).
Corrective Action
Insert the power cord into the outlet until it is fully in.
Press the [START] button or the [ENERGY SAVER]
button to clear the Energy Saver mode.
Refer to the Quick Start Guide.
Press the [START] button.
Lighten the contrast.
Refer to the MFP Management Guide.
Press the [START] button or the [ENERGY SAVER]
button to clear the Energy Saver mode.
Refer to the Quick Start Guide.
Press the [START] button.
Wait until the message "Warming up" disappears and the
equipment is ready.
Enter your department code. If you do not know it, contact
the administrator of the equipment.
Enter your user name and password. If you do not know
them, contact the administrator of the equipment.
See the following page to see the meaning of the
message.
P.8 "Messages Displayed on the Touch Panel"