Paper Jam In The Reversing Automatic Document Feeder (Optional) - Toshiba E-Studio 2330c Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
If paper jams occur frequently
The following are the common causes of paper jams. If the problem persists, check for the following situations.
An unsuitable original is placed on the Reversing Automatic Document Feeder.
Unavailable paper with the equipment is used.
Paper sizes are not consistent between the size in a drawer or the bypass tray and the one registered in the
equipment.
All the jammed paper has not been removed.
There is too little or too much gap between paper and the side guide in the drawer.
The amount of paper placed in a drawer exceeds the limit indicated on the side guide of the drawer.

Paper jam in the Reversing Automatic Document Feeder (optional)

1
Raise the lever and open the upper cover.
2
Remove the original.
3
Turn the dial to remove the original.
4
Open the transport guide.
1 TROUBLESHOOTING FOR THE HARDWARE
2
1
Clearing a Paper Jam 13