Sony BDV-IT1OOOES Operating Instructions Manual page 96

..
• For details on setting the TV and the connected
components, refer to their operating
instructions.
iir:I
• The default setting of the Control for HOMI function
of the system is
[Off].
The system and TV work as follows (e.g.):
(One-Touch Play)
By only pressing ONE-TOUCH PLAY, the TV
turns on, the TV is set for BDIDVO input
selector, and the system starts playing a disc
automatically.
TV
Turns on.
(If
not already
turned on.)
~
Switches to HOMI input.
~
Minimizes sound level.
~
This system
Turns on.
(If
not already
turned on.)
~
Switches to "BD/DVD"
function.
(Theater Mode)
When you press THEATER, the system
automatically switches to the optimum video
mode for watching movies and the speaker
output also switches automatically. When
connected with a Theater Mode-compatible TV
using the HDMI cable, the TV's video mode
switches to Theater Mode.
If "SCANNING" or "COMPLETE"
does not appear after performing
in Control for HDMI - Easy Setting
Set the Control for HOMI function to on for the
system and the connected components
individually.
1
Press HOME.
The home menu appears on the TV screen.
2
Press +-1-+ to select;;; [Setup].
3
Press
""~
to select [HOMI Settings],
then press
0.
The options for [HOMI Settings] appear.
4
Press
""~
to select [Control for HOMI],
then press
0.
5
Press
""~
to select [On], then press
0·
The Control for HOMI function is set to on.
6
Set the Control for HOMI function of the
connected component to on.
For details on setting the connected
component, refer to its operating
instructions.
7
Select the input of the system
connected to the component you want
to use the Control for HOMI function for
(HOMI1, HOMI2), and repeat Step 6.
If you add or reconnect the
component
Perform steps of "Preparing for the Control for
HOMI function" again.
em
• During the setting of the Control for HDMI function
for the system, the System Audio Control function
does not work.
• If the Control for HDMI function for the connected
component cannot be set simultaneously by setting
"CONTROL FOR HDMI" of the TV, set the Control
for HDMI function using the menu of the connected
component.
• For details on setting the TV and the connected
components, refer to their operating instructions.
Starts playing the disc and (System Audio Control)
outputs the sound.
When playing back a connected component, the
system and the TV tum on automatically and
switch to the appropriate HOMI input.
em
• Make sure the HDMl connection is correct, and set
the [Control for HOMI] to [On].
• Depending on the TV, the beginning of the content
may not be played back.
• Depending on the disc, playback may take a while to
start.
• One-Touch Play does not work when you press
[:::>.
96
US