Sony BDV-IT1OOOES Operating Instructions Manual page 16

Gc::::JG
C'}
to
('f>
..
• System operation
Press BD (BD lights up for I second).
The remote enters system operation mode, and BD lights up when you press buttons for operation.
When operating the system, point the remote at the remote sensor
II
on the unit.
• TV operation
Press TV (TV lights up for I second).
The remote enters TV operation mode, and TV lights up when you press buttons for operation (TV does
not light up when you press a button that is not available for the TV).
To operate the TV, set the remote signal to suit your TV. For details, see "Controlling the TV or Other
Components with the Supplied Remote" (page 10 I).
16
US
About operation of the remote
You can operate this system, TV, and set-top box/digital satellite receiver using the supplied remote.
Change the operation mode by using OPERAnON CHANGE.
Inserting batteries into the remote
Insert two R6 (size AA) batteries (supplied) by matching the
<±>
and
e
ends on the batteries to the
markings inside the compartment.
-
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.