Table of Contents
Advertisement
98
US
Calibrating the
Appropriate Settings
Automatically
[Auto Calibration]
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
automatically.
..
• The system outputs a loud test sound when [Auto
Calibration] starts. You cannot tum the volume
down. Give consideration to children and neighbors.
• Make sure that the headphones are not connected to
the surround amplifier. You cannot operate the
following Steps with the headphones connected.
1
Press HOME.
The home menu appears on the TV screen.
2
Press
+-1-+
to select;;; [Setup].
3
Press "'/.." to select [Audio Settings],
then press
CD.
4
Press "'/.." to select [Auto Calibration],
then press
CD.
The confirmation display for [Auto
Calibration] appears.
5
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
Ex. BDV-IT1000ES
6
Press "'/.." to select [OK].
To cancel, select [Cancel].
Advertisement
Table of Contents
