Sony BDV-IT1OOOES Operating Instructions Manual page 54

..
~
Rear panel of the
surround amplifier
Wireless
transceiver
Wireless
transceiver
Rear panel of the unit (Ex. BDV-IT1000ES)
®
Inse-:ti~g,theY.lireleSs tra~sceiver
54
US
mil
• When you insert the wireless transceiver, make sure that the AC power cord (mains lead) is not connected to a wall
outlet (mains).
• Do not touch the terminals of the wireless transceiver.
• Insert the wireless transceiver with the S-AIR logo facing up.
• Insert the wireless transceiver so that the T marks are aligned.
• Do not insert other than the wireless transceiver into the EZW-RTlO slot.
You can transmit sound from the unit to an S-AIR product, such as a surround amplifier or S-AIR
receiver.
An S-AIR product is a component that is compatible with the S-AIR function.
To use the S-AIR function, you need to insert the wireless transceivers into the unit, surround amplifier,
and S-AIR receiver.
For details of the S-AIR function, see "Using an S-AIR Product" (page 89).