12
Press -t/-4" to select the setting for the
Control for HOMI function.
~ Easy Setup· ControllOJ HOMI
You can operate this unil in conjuncllOn wilh a TV connected by HOM1.
Check your TV settings when using this function.
On
Off
Select [On] to use the [Control for HDMI]
function (page 95) when connecting Sony
components that are compatible with the
Control for HDMI function.
If you do not use the [Control for HDMI]
function, select [Off].
13
Press
e
or-+.
The Setup Display for [Auto Calibration]
appears.
62
US
14
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
Ex. BDV-IT1000ES
15
Press -t/-4" to select [OK].
To cancel, select [Cancel].
..
• Make sure that the headphones are not
connected to the surround amplifier. You cannot
operate following Steps with the headphones
connected.