Sony BDV-IT1OOOES Operating Instructions Manual page 21

21
us
Check the polarity on the label.
Color tube Connector
Insert the speaker cords into the speaker terminal of the speaker as far as they will go. Ensure that
the cords are secure by gently pulling on them one at a time.
-
• When assembling, take care not to touch the speaker units.
iii!
• When removing the speaker cords from the speaker terminals, pull out the speaker cords while pressing the
white button on the speaker terminal with a tool such as a flathead screwdriver.
3
Connect the speaker cords to the speaker.
The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Use the speaker cords as follows:
• Front left speaker (L): White
• Front right speaker (R): Red
• Surround left speaker (L): Blue
• Surround right speaker (R): Gray
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord
with the color tube to (±), and the speaker cord without the color tube to
e.
Do not catch the
speaker cord insulation in the speaker terminals.