Rear panel of the unit (Ex. BDV-IT1000ES)
55
US
®ll1serting the
ext~rl1~IJII,ml)~[::;
':;,
.
'~.
. ,
,.
-,/:-:?,,-~":~<::::
-. - ...
' < ,:
USM1GH
(as of April 2008)
To enjoy BonusView
See "Enjoying BonusView" (page 69).
To remove the external memory
1
Press
IIC)
to turn the system off.
2
Pull out the external memory from the EXTERNAL slot.
1m
• Insert the external memory straight. If you force the external memory into the slot, this will cause damage to both
the external memory and the unit.
• Keep the external memory away from small children to prevent them from accidentally swallowing the external
memory.
• Do not apply too much pressure to the external memory in the slot, as it may cause a malfunction.
• Use the USM IGH (as of April 2008) external memory only.
• To avoid data corruption or damage to the external memory, turn the system off when inserting or removing the
external memory.
• Do not insert the external memory that contains photo or music files to avoid corrupting the external memory data.
1m
• Insert the external memory in the T direction into the EXTERNAL slot as far as it will go.
• Check that "EXT" lights up in the front panel display when turning the system on.
Insert the external memory (local storage) (not supplied: USM I GH (as of April 2008)) into the
EXTERNAL slot. By connecting an external memory, you can enjoy additional contents (BonusView)
depending on the disc.