Sony BDV-IT1OOOES Operating Instructions Manual page 90

iir:I
• To confirm the current 10, perform Steps I to 6
above. When you pair the unit with the S-AIR sub
unit (page 92), [(Pairing)] appears beside ill on the
display for selecting
10.
To use multiple S·AIR main units
You can use multiple S-A1R main units by
setting a different 1D for each component.
g~us
To set the ID of the surround
amplifier
1
Make sure that the SURROUND
SELECTOR switch of the surround
amplifier is set to SURROUND.
2
Set the S-AIR 10 switch of the surround
amplifier to match the 10 (A, B, or C) of
the unit.
3
Press POWER on the surround
amplifier.
When sound transmission is established,
the POWER / ON LINE indicator of the
surround amplifier turns green.
For details of the POWER / ON LINE
indicator, see "To check the transmission
status" (page 58).
iir:I
• When you use the additional surround amplifier
(optional) with the surround back speakers
(optional), set the SURROUND SELECTOR
switch to SURROUND BACK.
To set the ID of the S·AIR
receiver
Refer to the operating instructions of the S-A1R
receiver.
S-AIR main unit
(This unit)
( ,. J
IDA
- /
.../
. /
. /
.../
.../
j)
~
WI:
IDA IDA
S-AIR sub unit S-AIR
sub unit
Other S-AIR
main unit
I
An
04
lOB
P ..........
j)
')
')
I9.-JIJ--f]
lOB
S-AIR sub unit