Sony BDV-IT1OOOES Operating Instructions Manual page 158

SONY;
1111111111111111111111111111111111111111111111111111111
' 4 1 2 0 0 3 2 1 1 ' ( 1 )
4-120-032-11 (1)
Check the following.
I'!Imm
To stabilize S-AIR reception
Read the following when S-AIR reception is poor or unstable.
Keep cords that are connected to the S-AIR product (AC power cord (mains lead), speaker cords, or
other cords) away from the wireless adapter and slot.
o~
(91
~e -
. .
0
-=---:.0
p
~
====== II II
O
~ (Crt -.. o~~
V
~
n======'1
~ ;w
I ' , - - "
, ,,)1
,. ,
,,_::.1
0»»)(«
rD?
.....
....
Keep as much space as possible around S-AIR products.
Avoid placing S-AIR products on top of, or directly below, other electronic equipment.
Avoid placing S-AIR products in a closed rack, metal rack, or under a table.
Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is
the most stable.
Place so that the wireless adapters of the S-AIR main unit and sub unit are closer.
Place so that S-AIR products are separated from other wireless devices.
Place so that S-AIR products are separated from metal doors or tables.
If you cannot improve S-AIR reception, change the [S-AIR RF Change] / "RF CHANGE" setting. For
details, refer to the operating instructions of each S-AIR product.
S-AIR ID switch
S-AIR ID setup menu
Before using S-AIR products, have the following ready.
• Confirm the wireless adapters are inserted
correctly,
Insert the wireless adapters firmly to the depth
into the slots of the S-AIR main unit and sub unit
respectively.
• Confirm that the S-AIR IDs of the S-AIR main unit
and sub unit are the same,
The default setting of the S-AIR IDs of the S-AIR
main unit and sub unit is "A."
Depending on the S-AIR product, you can set the
S-AIR ID by the switch or the setup menu.
For details, refer to the operating instructions of
each S-AIR product.
• Other factors
The following may cause poor reception.
- Materials or structures, such as walls and floors
- The location where an S-AIR product is placed
S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may
cause lost connection or instability in S-AIR reception.
• Electronic equipment influence
The following may cause interference or cross talk. )\
- Cellular phones, cordless phones
i=
l "
- Wireless LAN, personal computers
hl))
- Game machines using radio signals IIfJ8
lllJ
- Microwave ovens -
When using S-AIR products, place them as far as possible from the above electronic equipment, or
place where S-AIR reception is stable.
©2008 Sony Corporation Printed in Malaysia