Uwatec Aladin Pro Nitrox Operating Manual page 86

7 Leaving the Diveplan-Mode
depth dive time
DIVEPLAN
DECOSTOP
m
max. depth deco info
3 s
or after 3 minutes
depth dive time
O % MIX
2
max. depth deco info
VI Dive Planner
If the contacts B and E are touched for about 3 seconds, Aladin
back into ready- or surface-mode. This also occurs three minutes after the activation
of the diveplan-mode.
On a short touch of contacts B and E the Aladin
back to the scrolling no-stop times.
In order to completely leave the diveplan-mode, B and E must be
continually bridged until two acoustic bleeps have occured.
If two or more divers using computers are planning a dive, planning for all divers
has to be based on the dive computer showing the shortest no-stop times.
Failure to do this may lead to serious injury or death from decompression sickness.
®
Pro Nitrox falls
®
Pro Nitrox switches
79
VI